fabster54
Jr. Member
Im selling my 74 bronco sport project..I just dont have time for it. Pics are in my gallery . im asking $2500 obo for everything .. i have not listed on craigslist yet ,ill give you guys first go at it.. please pm me with any questions , im very busy at work so i will respond asap..truck is sold on bill of sale. i ahve a old title for it in previous owners name.. but i think its worthless.. it does have a vin plate. but i have never registered it.
the truck is currently a rolling chassis , i have most parts for it.. The frame is in good condition. it has 9'' big bearing, dana 44 , ( stock 3.50 gears) c-4 , d20 j shift. has 3'' body lift on stock suspension. 31'' tires that are bald but hold air. wheels are aluminum and 15x9.. stock bronco p/s gearbox.. manual drum brakes all the way around..its missing bumpers, fuel tank(s) and hard top.. i have no top for the truck..i have a 302 efi out a 91 mustang with computer and mustang harness. engine has b303 cam and trick flow upper and lower intakes with a edelbrock 70mm t-body. brand new in the box centech harness . i also have the a/c compressor and smog pump for it.. engine has about 30k on a rebuild.. ran great before i pulled this out of the car.. body is in fair condition, floors have been replaced by p.o., there is rust in both front door posts, drivers rocker panel, r/r quarter panel, some filler in this area too, only spot on truck, frt inner fender tubs have some rust and have been cut. and each door has a quarter sized hole in them.front fenders are junk, windshield is good and still folds down. i primed the one side cause it was bare metal in spots while sanding.. drivers side is untouched and as i bought it.. i will NOT part this out unless someone buys the rolling chassis first.. thanks for looking.
the truck is currently a rolling chassis , i have most parts for it.. The frame is in good condition. it has 9'' big bearing, dana 44 , ( stock 3.50 gears) c-4 , d20 j shift. has 3'' body lift on stock suspension. 31'' tires that are bald but hold air. wheels are aluminum and 15x9.. stock bronco p/s gearbox.. manual drum brakes all the way around..its missing bumpers, fuel tank(s) and hard top.. i have no top for the truck..i have a 302 efi out a 91 mustang with computer and mustang harness. engine has b303 cam and trick flow upper and lower intakes with a edelbrock 70mm t-body. brand new in the box centech harness . i also have the a/c compressor and smog pump for it.. engine has about 30k on a rebuild.. ran great before i pulled this out of the car.. body is in fair condition, floors have been replaced by p.o., there is rust in both front door posts, drivers rocker panel, r/r quarter panel, some filler in this area too, only spot on truck, frt inner fender tubs have some rust and have been cut. and each door has a quarter sized hole in them.front fenders are junk, windshield is good and still folds down. i primed the one side cause it was bare metal in spots while sanding.. drivers side is untouched and as i bought it.. i will NOT part this out unless someone buys the rolling chassis first.. thanks for looking.
