AZ 76-79 F150 4x4/78-79 Bronco power steering box housing

[toddz69]

City: Phoenix

76-79 F150 4x4/78-79 Bronco power steering box housing. No internals or other parts. Used for the 4x4x2 conversion for EBs. Clean and not rusty. Free + the ride to your house (likely use USPS flat rate large box) or local pickup/meet up ok in the Phoenix area too.

Thanks,
Todd

 

[snick]

I’ll take it Todd. How much is a flat rate box shipped to 93110? Thanks!

 

[ngsd]

Tood, you probably know better than me. What box is this on my 72? I was told it was a 2wd box converted.

 

[toddz69]

Yes, that's the 2WD F-Series box. Various manufacturers and versions from about 65-79 (might be wrong on the early years but they're all very similar). That one appears to have a vintage Protofab sector shaft brace as well.

Todd Z.

 

[ngsd]

Yes, that's the 2WD F-Series box. Various manufacturers and versions from about 65-79 (might be wrong on the early years but they're all very similar). That one appears to have a vintage Protofab sector shaft brace as well.

Todd Z.

I knew you would know! Thanks