I'm gonna sell mybronco , just no time to ride. The body is 90% straight and the paint is shinny, just a couple of small paint scuffs. Everything has been replaced or rebuilt. Runs srong and cool . I built it 5 years ago and have35 to 40 hours of ride time on it.
Body is rust free, has been cut for clearance, has 2 x6 sliders welded to frame, 2x6 rear bumper (have tire rack for it also), jd fab front bumper with new warn 8000 with synthetic line, war flares, fiberglass hood, custom cage welded to frame, bucket seats with rear bench, 4 point harness for all, custom console.
Engine is a5.8 roller motor, rebuilt .30 over, trick flow cam, howell fuel injection with edelbrock intake, explorer front accessories., psc exporer superpump, copper radiator.
C4 built by Art Carr with reverse manual valve body, deep aluminum pan, art carr shifter.
North West Fab black box mated to 2.0 Atlas, NWF cable shifters, Atlas short c4 stub shaft.
High angle driveline flange mount shafts with 1350 cv and 1410 rear joint
14 bolt rear, shaved, trussed, disc brakes, 5.13 ratio, 3/8 cover, James Duff 4 link 3" back.
79' dana 60 kingpin, chromemoly shafts, 35 spline drive slugs, locker, 5.13 ratio, psc hyd. steering, Rubicon suspension, wild horses track bar riser, adjustable coil buckets.
39.5 pitbull rockers on beadlocks, have boggers if you perfer them.
Lots of other blah blah. Ready to go needs nothing but a new home.
Body is rust free, has been cut for clearance, has 2 x6 sliders welded to frame, 2x6 rear bumper (have tire rack for it also), jd fab front bumper with new warn 8000 with synthetic line, war flares, fiberglass hood, custom cage welded to frame, bucket seats with rear bench, 4 point harness for all, custom console.
Engine is a5.8 roller motor, rebuilt .30 over, trick flow cam, howell fuel injection with edelbrock intake, explorer front accessories., psc exporer superpump, copper radiator.
C4 built by Art Carr with reverse manual valve body, deep aluminum pan, art carr shifter.
North West Fab black box mated to 2.0 Atlas, NWF cable shifters, Atlas short c4 stub shaft.
High angle driveline flange mount shafts with 1350 cv and 1410 rear joint
14 bolt rear, shaved, trussed, disc brakes, 5.13 ratio, 3/8 cover, James Duff 4 link 3" back.
79' dana 60 kingpin, chromemoly shafts, 35 spline drive slugs, locker, 5.13 ratio, psc hyd. steering, Rubicon suspension, wild horses track bar riser, adjustable coil buckets.
39.5 pitbull rockers on beadlocks, have boggers if you perfer them.
Lots of other blah blah. Ready to go needs nothing but a new home.
Attachments
-
20140802_103812.jpg183.9 KB · Views: 1,003 -
20140802_104027.jpg97.4 KB · Views: 599 -
20140802_103930.jpg142.8 KB · Views: 659 -
20140802_103848.jpg101 KB · Views: 681 -
20140802_103824.jpg127.5 KB · Views: 654 -
20140802_103911.jpg169 KB · Views: 722 -
20140802_103836.jpg136.5 KB · Views: 799 -
20140802_103901.jpg153.4 KB · Views: 828











