SC 79 full width axles and 4sd/205

[blazinchuck]

everything is clean, the axles are geared to 4.56(HPD44/9")...mini spool in the rear. the 435 and 205 are in great shape. nothing missing-shifts great. will post some pics

was going to do another full width swap...but changed my mind

 

[blazinchuck]

everything is clean, the axles are geared to 4.56(HPD44/9")...mini spool in the rear. the 435 and 205 are in great shape. nothing missing-shifts great. will post some pics

was going to do another full width swap...but changed my mind

Here's a couple pics

Sent from my VS988 using Tapatalk

 

[bax]

Is that a big bronco frame or an f 150? Lots of good parts there. Should be a 31 spline rear. Plus its a disk brake front axle. Transmission and transfer case will go right in an EB. Someone should snap this up.

 

[fordfan]

Is that a big bronco frame or an f 150? Lots of good parts there. Should be a 31 spline rear. Plus its a disk brake front axle. Transmission and transfer case will go right in an EB. Someone should snap this up.

It looks like a truck chassis...I think it's too long for a BiG Bronco... You need this Bax!

 

[bax]

Looks like a truck to me too. No big pan under the trans/ transfer case. The broncos had the big pan.

 

[blazinchuck]

it is a 79 F100 short bed frame. yes...lots of great parts, complete steering and exhaust too