• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

9 Inch and Other items need to go!- Take A Look!

Status
Not open for further replies.

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
This is a list of parts I need to get out of my garage. Updated.

- 1970 small bearing 9 inch rear complete 4.10 open diff
- factory tierod
- reman master cylinder non-power brakes
- 3 speed manual for 6 banger with adapter
- starter for v8 manual
- factory track bar
- Factory radius arms

If interested in any items shoot me an email or pm. I want to move all these items so I will consider all offers and I am not looking to make a lot of money, I just want someone to use the stuff. Shipping is a real pain for the big items so pickup for those is needed but the smaller items I can ship. Contact me with questions. Thanks Dave dventi@metroonelpsg.com
 
Last edited:
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Added stock radius arms to the list

I also have stock radius arms if anyone is interested
 
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
steering box and parts

$100 takes it all but shipping will be a little pricey due to the steering box being so heavy. Let me know if you are still interested and I will get a quote tomorrow. Thanks Dave
 

maws75

New Member
Joined
Nov 13, 2006
Messages
37
I will take the steering box and misc if 66broncoluvr doesnt. Just need to know shipping to 99216. Thanks Mark
 
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Steering box and shifter sold- still have everything else

Steering box and shifter sold. Everything else still for sale.
 

jeffncs

Contributor
Sr. Member
Joined
May 4, 2004
Messages
1,174
Loc.
Raleigh, NC
May I have a couple pics of the rear seat? I'd like to see the condition of the seat covers.

Thanks.
Jeff
 

jimbo11

Full Member
Joined
Jun 12, 2005
Messages
271
Loc.
columbus
rear seat

This is a list of parts I need to get out of my garage. I am running out of space.

- 1970 9 inch rear complete 4.10 open diff
- F100 power steering conversion box, conversion from WH with bracket and hoses, conversion draglink also included-SOLD
- factory tierod
- reman master cylinder non-power brakes
- 3 speed manual for 6 banger with adapter
- JD floor shifter complete for same trans but can be converted to v8 by getting the longer rods or extending them- SOLD
- starter for v8 manual
- factory track bar
- black factory rear seat in good condition

If interested in any items shoot me an email or pm. I want to move all these items so I will consider all offers and I am not looking to make a lot of money, I just want someone to use the stuff. Shipping is a real pain for the big items so pickup for those is needed but the smaller items I can ship. Contact me with questions. Thanks Dave dventi@metroonelpsg.com

Add stock radius arms to the list!

very interested in rear seat..any photos? Please sent and cost to jfoster1500@sbcglobal.net
Thanks Jim
 
OP
OP
gravy

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Items still for sale- I have pics available of rear seat for those interested. Thanks
 
Status
Not open for further replies.
Top