• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

94 5.0 leaking water only after it has been run

74bronk

Full Member
Joined
Sep 1, 2004
Messages
358
Antifreez leaking from the front of engine above the waterpump around the intake, only after it was driven then when you shut motor off it leaks out! Any one have this problem? if so, where is it leaking from? I don't think its the thermostat housing either.

any help on this is appreciated!!!
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
Sounds like its leaking from the intake manifold might need to make sure its torqued properly. sometimes the bolts loosen up and will leak when the engine is hot.
 

Gordys74

Sr. Member
Joined
Sep 17, 2002
Messages
555
Loc.
Southern Iowa
I agree that its probably the intake manifold gasket around the water port. I redid mine a few weeks ago and I had to retork it about three times to get it tight. The gaskets seem to relax after the initial torking and the bolts are a little loose making the gaskets not seal well. Try retorking the intake bolts.
 
OP
OP
74bronk

74bronk

Full Member
Joined
Sep 1, 2004
Messages
358
problem found

thanks guys, found the leak. one of the bypass hoses were leaking and spraying on the block
 
Top