OH 98-01 Ford Explorer 5.0 Exhaust Manifolds GT40P

[1buckeyefan1]

City: Columbus
Price: $ 100

---

Kept this around for my explorer swap, but went with Sanderson Headers instead. Stock exhaust manifolds from a 2001 Ford Explorer, fits GT40P heads.

stamped: rf-xl2e-9431-ca

Price: $100 takes both sides. can use a blasting/painting/coating, but otherwise in good shape.

I'm going to be at Supercel on 4/21 and can deliver if pre-paid. Or I can ship on your dime.

 

[904Bronco]

I wish you had made these available sooner, timing is everything I guess.
I bought a set of Dorman offshore replacements from Rock auto. I had to do a little grinding to clean up the castings to my liking, followed by high temp paint.
The factory parts are always better! GLWTS.

 

[1buckeyefan1]

I wish you had made these available sooner, timing is everything I guess.
I bought a set of Dorman offshore replacements from Rock auto. I had to do a little grinding to clean up the castings to my liking, followed by high temp paint.
The factory parts are always better! GLWTS.

Dang, that's a bummer. It was your threads that actually inspired me to keep them as long as I did I appreciate all of the Explorer swap advice you've given. I'm not done yet, so I'm sure I'll be asking you more..

 

[904Bronco]

Thanks for that... Just sharing the knowledge I gained with doing Explorer swaps... On my 5th right now, even did my own harness this time

 

[youngun]

Will these work in an early bronco with gt40p heads?

Sent from my Pixel 3 XL using Tapatalk

 

[youngun]

Or what should I search to find your threads on explorer swaps that yall are talking about.

Sent from my Pixel 3 XL using Tapatalk

 

[1buckeyefan1]

Or what should I search to find your threads on explorer swaps that yall are talking about.

Sent from my Pixel 3 XL using Tapatalk

Here's a thread i started with some info I gathered from past threads

Mountaineer/Explorer 5.0 Swap

I know.. yet another 5.0/4R70W swap. I've read a good bit of the threads and gleaned enough information to make me comfortable giving it a shot. This will be me first swap of any motor/trans. I originally intended this for be a 'help me' thread, but after seeing many of the same questions...

classicbroncos.com

Yeah, these will work with gt40p heads.. they cam off a 2001 explorer/mountaineer. 904 has done 5 builds with them so far. I went with the headers that broncohut used to sell.

Sent from my SM-N981U1 using Tapatalk

 

[youngun]

Here's a thread i started with some info I gathered from past threads

Mountaineer/Explorer 5.0 Swap

I know.. yet another 5.0/4R70W swap. I've read a good bit of the threads and gleaned enough information to make me comfortable giving it a shot. This will be me first swap of any motor/trans. I originally intended this for be a 'help me' thread, but after seeing many of the same questions...

classicbroncos.com

Yeah, these will work with gt40p heads.. they cam off a 2001 explorer/mountaineer. 904 has done 5 builds with them so far. I went with the headers that broncohut used to sell.

Sent from my SM-N981U1 using Tapatalk

I have the headers that broncohut used to sell now. Have you run yours without any issue yet? I can send you photos of what mine look like, it's not good.

Sent from my Pixel 3 XL using Tapatalk

 

[1buckeyefan1]

I have the headers that broncohut used to sell now. Have you run yours without any issue yet? I can send you photos of what mine look like, it's not good.

Sent from my Pixel 3 XL using Tapatalk

Nope, I don't have my exhaust hooked up yet. Go ahead and post or PM me your pics. I'll post mine in my original thread

Sent from my SM-N981U1 using Tapatalk