Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
HOw do i bend these metal lines without breaking them or severely weakening them? I need them to fit my new tranny cooler and this is the only way i can see it working.... thanks in advance
I use one of these... http://cgi.ebay.com/Ridgid-456-Tubi...goryZ303QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Although this one doesnt specify size, my bender works on 1/4", 5/16", and 3/8" steel tubing. With this, and a double flare kit you can do just about anything needed, from brake lines, to fuel lines , to power steering cooler lines. Good luck with your project. ~bh