Another Hydroboost question

[Bronkster]

Maybe I can re-word this and get some responses? What bracket are people using for a canned ham style power steering pump with serpentine set up on a 351W? So far I have struck out with Tom's and Wild Horses. Come on guys, need a little help here to minimize head scratching and tail chasing.

 

[RustyShackelfor]

have any pics? probably need a serp pulley for a sag if im understanding correctly.

 

[EricLar80]

If you want to pull a serpentine pulley for a saginaw, get one off of an early 90's S10. You will know when you see it, based on the look of the pump, but they are very easy to find. Or, about $15 from Napa - check this number: NPS 73032

Eric

 

[Bronkster]

Thanks, I'll check that part #. That's 1/2 the challenge and David you are correct I just need a serpentine pulley for a Saginaw pump and I did see a bracket that looks like it would work from BC.

 

[Bronkster]

The pulley issue is solved, but still looking for suggestions on mounting bracket for the canned ham style Saginaw pump on a 351W.

 

[Bronkster]

looking for a little help?

 

[RustyShackelfor]

what is the rest of the serp? truck system? mustang? I have serp sag mounts.

 

[EricLar80]

Do you want something off the shelf, or are you able to make something? There aren't very many options off the shelf except this one:
http://www.wildhorses4x4.com/product/Delphi_saginaw_pump_bracket/Bronco_HD_Delphi_Steering_Pumps

Eric

 

[Bronkster]

EricLar 80, when i talked to WH they said there is 100 different Saginaw pumps and their bracket may clock the pump wrong depending on the pump. I bought the pump from scrapman off this site and can send a photo. I was looking for something off the shelf, but have already ordered the wrong 1 so at this point I'm just interested to know what will work?
Rusty, I'm not sure what the rest of the serp set up is from, but can take a photo if that helps or is necessary to determine what will work.

Do you want something off the shelf, or are you able to make something? There aren't very many options off the shelf except this one:
http://www.wildhorses4x4.com/product...Steering_Pumps

Eric

 

[EricLar80]

There are different clockings, I think it is. Ford vs chevy thing. What was the application of the pump you bought? Do a little searching for the "Lars power steering bracket" and I think will may run across the application for their pump to check against yours.

Eric

 

[73azbronco]

mustang or explorer serp?

I remember looking for this exact answer and couldn't find one. I stayed with the stock explorer pump on the explorer serp.

 

[EricLar80]

Based on this thread, you can use a chevy pump with the Lars bracket, but you need to trim it some.

Here is a good read: Lars Bracket

Eric

 

[Bronkster]

thank you Eric, and I'm sending some pictures Rusty. Hopefully you can help identify what I'm working with.

 

[TOFIC]

get the mounting bracket from Dusty at west coast broncos
less than 100 bucks and it is a bolt on to the 351.
tried all the tricks myself and just gave up and used dusty's system
TOFIC