• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Anyone use BC's Lock Resistant Braking System?

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Not real sure how that valve is supposed to work it sounds as if it only stops pressure spikes not brakes that lock up under normal operations might want to call Chuck and see if he has any better input. Besides a adjustable valve which is only half the price of that valve have you thought of using a different MC maybe slightly larger bore would help reduce the line pressure. Another thought is to run bigger line all the way to the rear brakes that might reduce the pressure also. Most of what I've read on brake systems is you really dont want to have valves in the lines if you can help it.
I would want the simplest valve I could get if I needed one just so theres less chance of failure although the rear brakes are a little less critical than the fronts.
I've never heard of the adjustable valves having problems but I havent done a lot of research on them either.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
The LBS valve delays the brake pressure. The ides is when you slam your brakes the front gets heavy and the rear gets light so it is very easy to lock the rear brakes for that very short time so the LBS valve lets the rear brakes come on slower over a couple of micro sec. so as the weight comes back to the rear the brakes come on. There is nothing to fail inside because it is a very fine mesh screen that slows the fluid down a little. This Valve will not help if you have too much brake on the rear and that sounds like the case with your D-70 drums. More brake on the front would help but if you already have the T-bird calipers on the front the easiest fix would be a P-valve or smaller rear wheel cylinders. Because of the nature of hydraulics the size of the lines will not change the pressure at the wheels and the M/C bore will change the pressure on both the front and rear equally.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Ditch the super heavy drums and spend a little more money on the Chev disk brake kit - what axle are you running up front?
 
OP
OP
68 Broncoholic

68 Broncoholic

Bronco Guru
Joined
May 16, 2005
Messages
1,742
Loc.
WA
I run a HPD60 up front. I added a Master Cylinder off an F250 Camper Special which bolted up perfectly (no booster).

I'd rather do the rear disc conversion but don't want to spend $300 at the moment.

Another question: If I run an adj P-Valve and have a rear line lock, will it have enough pressure in the drums to hold? Gotta be able to do front digs!
 
Top