• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

AOD with column shift?

bcmbcmbcm

Sr. Member
Joined
Apr 25, 2009
Messages
452
Loc.
Wellington Fl
Hey folks,

I'm just wondering if anyone has done an AOD swap using a column shift, either stock column or aftermarket.

Thanks!
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
yes it has been done, search the archives.

I changed the shift rods from the column to the transmission. There is a bell crank at the transmission to adjust the shifter for the gears to keep the indicator in the right spot.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,553
I did mine with an Ididit column. I used a cable shift. Ididit has a kit for the AOD/ cable shift. They do not advertise it but they have it. I had no problem with system
 

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
I am actually doing it right now. Using a 78 tilt bronco column I rebuilt and AOD. I got a shifter rod kit from lokar and used the rod ends with a longer 5/16 rod. I am not finished installing the column yet but I will post some pics when its complete.
 

COBlu77

Sr. Member
Joined
Feb 10, 2004
Messages
867
Loc.
Arvada, CO
Try searching for "4R70W". The shift pattern and the shift lever on the tranny are the same. I used my stock EB column and it works well. I modified a bell crank from an 80's Grand Marquis that had an AOD. There are some pictures in my gallery.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,115
I just did a 4R70W stock column shift. It is a close relitive to the AOD so it should be about the same.
The arm on the transmission should point down and forward when in park. For me the length of the arm between pivot points needed to be stretched to 4" to get the proper throw for the detents to line up.
 
OP
OP
B

bcmbcmbcm

Sr. Member
Joined
Apr 25, 2009
Messages
452
Loc.
Wellington Fl
I did mine with an Ididit column. I used a cable shift. Ididit has a kit for the AOD/ cable shift. They do not advertise it but they have it. I had no problem with system

I would prefer a cable shift...I searched ididit's site and they have one for a factory Ford column and not an ididit column...is this the one you are using?
http://www.ididitinc.com/catalog/09_catalog/pg46.htm

part 2802550010
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,553
The cable and the transmission hook up 's are the pats I used but the bracket on the column to hold the cable will not fit the EB. I mounted my cable to the back side of the inner wheel well. There is another bracket that bolts to the end of the column and it is a single arm type. it is also for an AOD. You need to Ididit on some of these parts because they do not show everything they have especially if they don't make it. I may have some pictures of it.
 

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I am looking to do this very soon. I need pics. I am the kind of guy that needs a visual aid! Any knowledge would be greatly appreciated!
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I will take some pics of my mess tomorrow and post them along with some measurements. It is really simple actually.
 
Top