Are ARB switches the same for both lockers and compressor? (+ did ARB change switch cover design?)

[thiswildbronco]

During the course of my years-long build, some of the ARB switches and covers have gone missing . I'll need to either replace missing bits or order a new set. I'm missing 2 switches and 1 cover (Compressor).

Does anyone know if the switch for the compressor is the same switch that is used for the lockers?

Also, in looking online for replacements, it looks like ARB may have moved to a new design with no switch illumination. Is this true? I very much want to stay with the blue illuminated switches (I still have the switch covers for both F&R lockers).

Thanks!

Doug.
https://www.instagram.com/thiswildbronco/

 

[rocknhorse76]

Yep all of the switches are the same and have interchangeable rockers. The ones I have are only a few years old and are still illuminated.

 

[73azbronco]

I think all are off or on, seeing as you want on for air to axle, and to stay on, and you want compressor on if so selected, to stay on until deselected.

 

[nvrstuk]

Post up a pic of what you want.

I have original blue ARB switches circa 1987 and 1996. and several newer ones from the '00's.

 

[thiswildbronco]

Yep all of the switches are the same and have interchangeable rockers. The ones I have are only a few years old and are still illuminated.

Mix'n'match!
Exactly what I was hoping to hear.
Thanks!

 

[nvrstuk]

Mix'n'match!
Exactly what I was hoping to hear.
Thanks!

The newer ones might be the same. The older ones aren't.

 

[thiswildbronco]

The newer ones might be the same. The older ones aren't.

Yeah, I'm going all new style. Thanks!

 

[Johnnyb]

I have a couple of recent switches left over, I hooked my arbs to the six shooter and therefore didn't use the ARB switches.

Not going to be home for a few weeks but I'd be happy to part with them, just to get them out of my electric box. PM me if you can wait a couple weeks.