• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Badge install

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
I shaved my badges off years ago by welding the holes shut. I've come to my senses and decided its time to reinstall them. What size hole should I drill for the clips to go into? Thanks

Sent from my SM-G973U using Tapatalk
 

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
Maybe buy the badges and the barrel clips first then use a caliper to measure their diameter.

I just went through this with a new replacement fender and I can tell you that the 302 badge clips and the BRONCO clips are not the same diameter holes. It's easy to drill a larger hole in your painted fender, not so easy to fix one that is drilled too large.

John
 

Fitz24

Bronco Guru
Joined
Jul 4, 2007
Messages
1,299
Use Dbl Sided tape or a glue made for badges. Don't need to drill fender. I think I used a 3M adhesive on mine. Been 10 years and their still there.
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
Have you considered using stamped nuts instead of the barrel clips? The hole size wouldn't be as critical.
 
Top