• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bailie Bilt bumper install

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I tried to install my new (and newly powder coated) BB bumper the other night and I just couldn't get it to slide in. The arms slide in easy enough but where it starts to snug up it just stops. I'm wondering if my frame is bent or something. Can you guys tell from these pics? I'll post some more with the bumper in place a bit later.
351F28CE-3AF0-48FE-A32E-50AC43B043CE-1741-000000F5136F4811.jpg

720D44AE-94CF-4E86-B786-A57BF173F528-1741-000000F50FBABBEC.jpg

86ADEA4A-78F3-4B50-931D-25BB26F34EB4-1741-000000F50C7057E0.jpg

083E7F32-C2B8-485A-B761-519F2A5C23EF-1741-000000F507F72C9F.jpg

415B895A-59A6-4523-AE69-423F58F8A85B-1741-000000F50392839B.jpg
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Just do a little more test fitting and see what has to move. Chances are a few customizing blows with a hammer to the passenger side frame will fix it right up.
 

DuctTape

Bronco Guru
Joined
Jun 20, 2008
Messages
1,148
Loc.
Bozeman, MT
My horns have weld burrs and are slightly bent. I'd try bfh first and if that doesn't work you may have to do a little filing, grinding etc.

One thing I learned early on with my bronc is that you can't expect parts to always fit perfectly. I can't count the number of times I've had to make modifications to brand new parts (or bronc) in order to make it fit.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
My horns have weld burrs and are slightly bent. I'd try bfh first and if that doesn't work you may have to do a little filing, grinding etc.

One thing I learned early on with my bronc is that you can't expect parts to always fit perfectly. I can't count the number of times I've had to make modifications to brand new parts (or bronc) in order to make it fit.

Oh yeah. I just wasn't sure if my frame was bent or it was likely weld burrs. I'd rather hammer the frame than grind the bumper honestly! I noticed what looked like paint drips on the frame that are obviously weld burrs. Crap. I can't hammer on the bumper without messing up the powder coat.
 

DuctTape

Bronco Guru
Joined
Jun 20, 2008
Messages
1,148
Loc.
Bozeman, MT
Oh yeah. I just wasn't sure if my frame was bent or it was likely weld burrs. I'd rather hammer the frame than grind the bumper honestly! I noticed what looked like paint drips on the frame that are obviously weld burrs. Crap. I can't hammer on the bumper without messing up the powder coat.

I just looked at your pics and it looks to me like the horns are bent a bit.
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
Once you massage your frame into shape do yourself a favor and plate those frame horns! Bad things happen when stock Bronco frames are asked to support the weight of plate steel bumpers, especially when winching. Seen a few EBs with nice aftermarket bumpers that just fall off due to a cracked frame after running heavy bumpers a few years. Not good.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
Once you massage your frame into shape do yourself a favor and plate those frame horns! Bad things happen when stock Bronco frames are asked to support the weight of plate steel bumpers, especially when winching. Seen a few EBs with nice aftermarket bumpers that just fall off due to a cracked frame after running heavy bumpers a few years. Not good.

This sounds like good advice. I have no idea how to do that though. Do you have any pics of this or links? Or even just details of what exactly you mean? Thanks!
 
Top