BC Broncos EFI Cable install Explorer swap

[Postalpal]

Has anyone installed the BC Broncos throttle cable on the EFI Explorer swap
The black lever they gave me doesn’t have the hole in it that their instructions show , I know I need to drill a hole in the throttle body linkage per their instructions
So assuming I need to drill the hole that supposed to be there , how crucial is it for placement?
I can eye ball the placement where I need to drill holes on both pieces
Is this sufficient?

Thank you

 

[fluffybunny]

In your 6th picture where the plate is sitting on top of the throttle body, it looks like you have it oriented wrong when compared to the instruction sheet.

 

[Postalpal]

Your right , but if you look at the photo of it next to the diagram you can see it’s pictured the same way & is missing a hole in the black lever

 

[fluffybunny]

I would just locate the plate over the throttle pin like the instructions say and just pop a 1/4 hole through the plate and the throttle lever.