• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

bc broncos quarter guards pics?

strokers

Full Member
Joined
Aug 11, 2010
Messages
192
I ordered a set of their guards yesterday, today chuck gave me a call to inform me that the current 1/4 guards on one side doesn't fit by about 1/2 inch. He gave me the choice to cancel the order or he could ship them to me to see if they were close enough to work for me.
so i was hoping that someone had purchased a set of these recently and could post some pics with the gap chuck had told me about?
 
Last edited:

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
there is a thread on this issue, do a search and you'll find many different issues
 

Pokey71

Bronco Guru
Joined
Feb 24, 2007
Messages
1,010
Interesting how he now claims that they are not what he has pictured on his site. Nor that they fit the body properly.

IMHO:
They do not fit the body at all. Not worth that much coin for an inferior product.
 

Bronco Biff

Sr. Member
Joined
Dec 20, 2006
Messages
934
I guess its all in what you've got, how you handle it and what you do wiht it in the end!!! I bought some of the last batch and, yes they did not fit perfect but a little reshaping with a hammer and they worked out fine. I worked them cold and got the gaps closed up fine for me. These pictures aren' t real clear and I'll try to get some better ones this evening.....
 

Attachments

  • mg73bw.JPG
    mg73bw.JPG
    77.2 KB · Views: 82
  • 73starr.jpg
    73starr.jpg
    130 KB · Views: 75
OP
OP
S

strokers

Full Member
Joined
Aug 11, 2010
Messages
192
I guess its all in what you've got, how you handle it and what you do wiht it in the end!!! I bought some of the last batch and, yes they did not fit perfect but a little reshaping with a hammer and they worked out fine. I worked them cold and got the gaps closed up fine for me. These pictures aren' t real clear and I'll try to get some better ones this evening.....


Thanks for the pics would appreciate some close ups and general run down of how you got them into shape.
 
Top