Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Then took the tires off, then attached the billet knobs. Same shaft sizes, easy peasy. Only issue was the power port had to be machined off then drilled and threaded.
Here is what we have as options for a clean or factory look.
We made stock looking knobs for stock switches. We also made some with optional hole sizes/ threads for different size shafts so you can match the knobs using non stock parts like a/c and our hood release handle. The Aluminum center can be used or you can leave it off so the knob is all black.