• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Billit fuel door

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Hey Bax, you have a pic with the cap off down the throat. Was wondering about how it affixes to the filler tube.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Hey Bax, you have a pic with the cap off down the throat. Was wondering about how it affixes to the filler tube.

I can get you a picture of it no problem. The filler has a 2'' hose barb on it. I bought a 2'' 90 and put on it with no problem. I plan on making up the steel tube part this weekend. I can't tag it without that being done.

Bax
 

jtd123

Jr. Member
Joined
Jan 20, 2007
Messages
125
Loc.
merritt island
that looks great! dont understand the tag part though? the more you post pics of that truck the more i want to send mine through the crusher! you guys will have to help me with posting pics ill be out of the paint booth next week.
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
that looks great! dont understand the tag part though? the more you post pics of that truck the more i want to send mine through the crusher! you guys will have to help me with posting pics ill be out of the paint booth next week.

Shoot them to me if you need to, I'd be glad to post em for you.

admin@nwbroncos.com
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
that looks great! dont understand the tag part though? the more you post pics of that truck the more i want to send mine through the crusher! you guys will have to help me with posting pics ill be out of the paint booth next week.

Tag Part: License tag, I need to get it registered and get the "Tags"
 

jtd123

Jr. Member
Joined
Jan 20, 2007
Messages
125
Loc.
merritt island
ya i get it i thought you were saying that they were going to inspect how you hooked up the filler tube?i dont know how i passed the test to get into this club.thanks tito ill let ya know
 

Fishbone

Sr. Member
Joined
Nov 5, 2007
Messages
534
Loc.
Northern, Illinois
I think this would be cool, it's the cap I used on a bike I built. It should be easy to weld your filler neck to the bung. You would need to get a little creative with the vent though. Here's a link to it.
http://www.parts123.com/parts123/yb...~S2A30SKS7T12208109836d~Z5Z5Z5~Z5Z5Z50000123a
They also have the aircraft style that Tito used, although I would look for a used one like he did if you go that route.

Here's a pic of it in the bike. It's flush with the sheetmetal, and on a dark color it blends right in.

bike6.jpg
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
what size Mocal door should be run?

It looks like they have 2-4 inch sizes.

Z-200 locking cap
2'' dia fill
2.75 Dia mounting hole center
3.23 overall Dia.
$119.00 each
 

mustangtoby

Bronco Guru
Joined
Nov 28, 2007
Messages
1,757
Loc.
southwest Colorado
I did, I used a motorcycle gas tank. It was a pain (still is) to get the filler to work right. The aero cap is the way to go. The modern vehicle billet doors are too big (look and fit) for the Bronco cut quarters. Search aero fuel door and you should find info. The motorcycle method I think is a little cleaner look than the aero but not nearly as easy.


Beatiful work, Tito. Looks great!
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
$119 each - holy crap....:eek: :eek:

yeah Brian, $119.00 each, and I only have one tank. The front one is just for looks. I didn't want to weld up the hole. I may one day install another tank. But for now I just blew another $119.00

Bax
 

jtd123

Jr. Member
Joined
Jan 20, 2007
Messages
125
Loc.
merritt island
that could get confusing after a night on the town! i dont know how i ran out of gas ossifer i just put 200 gallons in it!
 

GraficO

Bronco Guru
Joined
Oct 2, 2007
Messages
1,381
Loc.
Albuquerque, NM
I have 2 matched lock billet AeroCaps... I'm geting down to the nitty gritty before doing my rebuild and I'm wondering if there are any good suggestions as far as getting the correct tubing to fit these bad boys and if anyone has suggestions on making some sort of filler vent inserts to avoid blow back when filling the tanks.

Is there a specific rated hose to be used for gasoline?
Any bright ideas on how to attach a breather vent to the hose or should I make something out of welded steel? If made out of metal... how do you seal it to the filler cap?
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
I have 2 matched lock billet AeroCaps... I'm geting down to the nitty gritty before doing my rebuild and I'm wondering if there are any good suggestions as far as getting the correct tubing to fit these bad boys and if anyone has suggestions on making some sort of filler vent inserts to avoid blow back when filling the tanks.

Is there a specific rated hose to be used for gasoline?
Any bright ideas on how to attach a breather vent to the hose or should I make something out of welded steel? If made out of metal... how do you seal it to the filler cap?

Install the filler. Get a 90 degree 2'' fuel rated hose. Install it on the 2'' hose barbed filler. Get a peice 2'' steel tubing, cut it about 5'' long. Get a 90 degree 5/8'' steel fitting. Drill a 5/8'' hole into the center of the pipe. Install the steel 90 into the pipe and weld it. Install it into the 2'' fuel line at the filler. Run some 2'' steel reinforced fuel line to the steel pipe and the gas tank, clamp it all. Next get some 5/8'' fuel line and run it from the welded fitting to the vent tube in the tank. Clamp it all. Your done.

Worked for me.

Bax
 
Last edited:

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Thats about as good of a tech as you can get...if it had pics it would go in the column to the left
<------

Thanks Bax!
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Jon dosen't have shirts my size. Do you want some pictures. I am in the shop welding on my rear bumper. Came in for a Klondike bar. yum.

Bax
 
Top