bilstein 7100 front and rear???

[PBR]

i know a lot of guys are running the 7100's up front with the 12" short body 360/80 but are you guys also running them in the rear and if so what size and valving??? if you are running something else let me know what the hot set up is for my rig. - 3.5" wh kit in front and 3.5" deavers in the rear + 2" body.

thanks.

and why does it seem that nobody is running fox's??? is it the $$$ or sizing???

 

[thegreatjustino]

Running 7100s 12" travel short bodies with 275/78 valving in the rear.

 

[mkaenel]

I am running 5125's with a 10 inch body. They work just fine for the rear.

 

[behemoth]

7100 front and rear with the 360/80 (default) valving. No issues.

 

[TJK74]

I agree the fox's are a great deal and after talking with Lars I plan to give them a try. Lars was previously running the Bilstein 7100's and went to the Fox's and seems to feel that they were a great improvement. Send him a PM and ask him to chime in.

 

[PBR]

so i am going to order the bilsteins tomorrow, for the rear should i go 12" short bodies or 10"???

and thanks for everyone's help!!!

 

[scsm76]

If you have stock mounts than 10" is about all you can fit with a 3.5" lift. If you have aftermarket mounts you should take some measurement first.