• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Black Cloud Boob Job Build Thread

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
Welcome back Coby! Weren't you famous back in the day for breaking everything BUT the stock small bearing 28 spline axles in the 9"?
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
You got a pick of your first truck? This one looks great

This is my first truck....still the same one I started with. Just like the hammer where ya change the head three times and the shaft twice but it's the same ole hammer.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
Welcome back Coby! Weren't you famous back in the day for breaking everything BUT the stock small bearing 28 spline axles in the 9"?

Allen Fahey...I remember your name from back in the day! Yep, that'd be me...broke everything I could. Sometimes spectacularly.
 

yewhi

Sr. Member
Joined
Mar 23, 2011
Messages
368
Loc.
San Diego
Geez, I remember lusting over this truck over a decade ago when I still lived in castle rock and you were at cytomation. Glad to see you're doing well and good luck with the build. Looking forward to seeing it finished.

Tim N.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
Geez, I remember lusting over this truck over a decade ago when I still lived in castle rock and you were at cytomation. Glad to see you're doing well and good luck with the build. Looking forward to seeing it finished.

Tim N.

Heck of a memory, Tim. I'm still consulting with some of the original Cytomation folks on a part time basis. Formed some good relationships there with some brilliant folks. Love meetin' folks that make me feel slow 'n feeble. :)
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
Wiring question

Gonna get her rewired...it's been a long time and I wasn't the best wirin' guy to begin with. What's the current best setup for doing a lot of custom circuits? Kinda like that Access 24/7 fuseblock; is that fairly waterproof and durable? Is Painless still one of the better fuseblocks around? Who's making a good starter harness that plays nice with the SEFI and has extra room for lots of custom stuff?
 

Scrapper_MV

Sr. Member
Joined
Dec 14, 2006
Messages
960
Yea...I've heard that, actually. This is going to be a try it and see if it works kinda deal. Ross at Spidertrax is planning on doing the same thing and says it works; some others say it's too much pressure. If it doesn't work I'll go with a bigger caliper, and I might run some pressure reducers. Know anyone that tried it and had them fail? I really like the light weight unsprung mass approach.

My Bronco came with Wilwood calipers and a manual M/C. I went to Vanco and bought a hydro boost set up. When he heard that I had the Wilwoods he almost refused to sell me the booster. I talked him into it and brought it home and installed it. That was two years and many panic stops ago. So far the calipers have held together. But it's always in the back of my mind.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
1500 psi is the upper limit for bilwood calipers. I wouldn't use those billet Dynalites on anything off road. Forged Superlites and Forged DynaPro's maybe, but not billet DL's.

What all of the cool kids wire projects with these days:
http://www.isispower.com/index.html
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
1500 psi is the upper limit for bilwood calipers. I wouldn't use those billet Dynalites on anything off road. Forged Superlites and Forged DynaPro's maybe, but not billet DL's.

What all of the cool kids wire projects with these days:
http://www.isispower.com/index.html

isispower, eh? Very cool....nice to see the manufacturers come into this century....much thanks for the link on that; I likey.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
Wow TS, that Isis harness system is cool, but I just couldn't subject my Bronco to something that hi-tech. But that's just me. I could understand a cool kid using it, endless options, very nice.
 

yewhi

Sr. Member
Joined
Mar 23, 2011
Messages
368
Loc.
San Diego
Heck of a memory, Tim. I'm still consulting with some of the original Cytomation folks on a part time basis. Formed some good relationships there with some brilliant folks. Love meetin' folks that make me feel slow 'n feeble. :)

Nah... My memories not that great. You guys just helped me out a bit when I first got my bronco. Learned quite a bit by helping you and Matt G. do his frame swap in two days way back then. You learn a lot by taking things apart... Good luck again with this new project!

Best!

Tim
 

malonejy

Bronco Guru
Joined
Jul 21, 2001
Messages
1,032
Coby,

I acutally have a picture and build sheet you sent me back in 2003 when you sold it. Luckily for you, I did not buy it because you never would have never gotten it back ;D Black Cloud was awesome back then and I can't wait to see where to you take now. Looking forward to watching this thread.
 
OP
OP
C

coby

Full Member
Joined
Apr 24, 2003
Messages
317
Loc.
Fort Collins, CO
Coby,

I acutally have a picture and build sheet you sent me back in 2003 when you sold it. Luckily for you, I did not buy it because you never would have never gotten it back ;D Black Cloud was awesome back then and I can't wait to see where to you take now. Looking forward to watching this thread.

Oohh...could you send that to me? That'd be good....I'd really appreciate that! I used to have a ton of pics up but it was on someone elses server and I've lost all my copies of pics from back in the day.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
I don't see this happening again in the near future.
 

Attachments

  • RMR 023.jpg
    RMR 023.jpg
    130.4 KB · Views: 457
Top