Spaggyroe
Full Member
- Joined
- Dec 9, 2019
- Messages
- 284
I have a nearly new BCB Black Fantom that I'm not going to be using.
New from BC Broncos is $503.99
Asking $300 and I'll pay for shipping anywhere in the lower 48.
https://bcbroncos.com/shop/engine/c...black-fantom-electric-fan-kit-bi-directional/
Description from their website:
This shroud and fan kit was designed by BC Broncos for our Coyote kit to mount to the ron davis radiator, mounted into the Bronco mounting brackets.
The fan mounts to the radiator with 4 mounting bolts (the RD radiator has no mounting holes mount and transfer from pre drilled holes in shroud to the radiator).
Once we started using these fans we found they also worked with the *short dress explorer (289,302,351) serpentine kit . Since then we have used them in our *4BT and new EcoBoost kits.
The fan pulls tons of air and keeps these engines cool even with the AC on.
This fan comes with a HD weather pack connector (1/2 installed on fan) the handle the amps the other half you wire to your harness or controller.
This fan will not work with the stock v-belts, stock offset serpentine(mustang), March pulleys or frontrunner systems, will not work with 4 core radiators, unless you really modify the core support.
*separate fan controller required
Thanks
New from BC Broncos is $503.99
Asking $300 and I'll pay for shipping anywhere in the lower 48.
https://bcbroncos.com/shop/engine/c...black-fantom-electric-fan-kit-bi-directional/
Description from their website:
This shroud and fan kit was designed by BC Broncos for our Coyote kit to mount to the ron davis radiator, mounted into the Bronco mounting brackets.
The fan mounts to the radiator with 4 mounting bolts (the RD radiator has no mounting holes mount and transfer from pre drilled holes in shroud to the radiator).
Once we started using these fans we found they also worked with the *short dress explorer (289,302,351) serpentine kit . Since then we have used them in our *4BT and new EcoBoost kits.
The fan pulls tons of air and keeps these engines cool even with the AC on.
This fan comes with a HD weather pack connector (1/2 installed on fan) the handle the amps the other half you wire to your harness or controller.
This fan will not work with the stock v-belts, stock offset serpentine(mustang), March pulleys or frontrunner systems, will not work with 4 core radiators, unless you really modify the core support.
*separate fan controller required
Thanks
