Blacked out hood Boss 302 style pics anyone?

[broncojoe76]

Hey, I just wanted to share my hood black out decal that I got from Crawlorado.com I hope this helps a bit.

http://www.crawlorado.com/store/index.php?act=viewProd&productId=25

 

[bronko69er]

Looks like the same bronco as on the site, are you the vendor?
I like that look BTW, I've been toying with that idea myself, perhaps the new daytona hemi charger look.
Something like this except with BRONCO or 302 on the hood.
http://carsmedia.ign.com/cars/image...odge-charger-daytona-rt-20050211015020402.jpg
I think blacking out the center of the tailgate and leaving the FORD raised would look sweet too.
http://images.google.com/imgres?img...=daytona+hemi+charger+yellow&gbv=2&hl=en&sa=G
Id like to do that along with some black rear coner guards.

 

[Crewwzin]

Power seat mechanism?

Some of those go down pretty flat, although you'd still wind up hacking into the cowl.



You have on board air?

Bicycle innertubes under the base of the hinge would lift it 6 inches easily, and drop back down totally flat.

Be really cool if you hooked it to a thermostat so it would raise automatically if the underhood temps got above the setpoint. Although if it went high enough it could pinch some fingers if it went back down at the wrong time.


I removed the inner fenders, and put some vents at the front of the hood and at the cowl. That cured my heat problems.

A little pricey, but this is the ticket right here.

www.selectproducts.com

Look under the actuator section.

 

[broncojoe76]

No, he is local and I got to have the prototype. I am also a big fan of the matte black look as well. I bet you they could do that or what ever you wanted. I was real happy on how it came out. The material they use is real durable too.

 

[Terkish]

I have been looking for Vinyl place that sells a sheet big enough to do that same thing to my bronco. Guess the search is over. $80 dose seem a bit steep though.