body lift and three speed linkage

[evil69]

I installed a two inch body lift (among lots of other things), and I'm wondering if I will need to cut and lengthen the lingage to the tranny. I do not want to put the shifter on the floor. Good theft protection (why do you have a clutch with an automatic?!!!) and because its different. I think I may have enough in the linkage already, but I figured you guys have come up on this. Thanks!

 

[Blue71]

We put a 2' lift on a '74 manual tranny Bronco and used the linkage adapter to lenghthen it.... from Duffs. Worked great.
I would probably use the adapter piece or lenghthen my rod so that there isn't any pull or binding on the linkage. I just put a 2"body lift on my'74 Automatic and definately had to use an adapte rthat added about 2" to my linkage. Got it from Duff also.

Blue71

 

[evil69]

The linkage for the extention is listed for the c-4. Is it just a threaded rod???? Or does it bolt right up to the three speed? Thanks man.