Body Mount Location Dimensions

[LSUpete]

Does anyone have a diagram that includes the dimensions for body mount locations?

 

[DirtDonk]

There are a few floating around here, but I know we’ve used the one from Steve83’s SuperMotors pages a lot.
I think they were posted up just a week or two back. But you can check out SuperMotors.com and search Steve83.

Or better yet, hopefully someone here (including Steve of course!) will have a direct link to what you need.

 

[Speedrdr]

These are from @Steve83 from the Supernet.com site. Not sure if this is what you’re looking for, but maybe.

Randy

 

[CowboyGrin]

If you’re sure you have a copy that hasn’t been resized, you can find dimensions not labeled on Steve83’s diagram by the number of pixels between points. The original copy and some instructions can be found at https://www.supermotors.net/registry/media/876772. Don’t use pixels with the section views on the right, just with the larger plan and elevation views on the left.

 

[LSUpete]

These are from @Steve83 from the Supernet.com site. Not sure if this is what you’re looking for, but maybe.

Randy

Thanks.....but none of his diagrams have the dimensions of the body mount locations.

 

[Steve83]

Yes, all the dimensions can be found there - you just have to do some math. Read the caption below the diagram on this page:

(click this text)


...and it works in the section views on the right, just like everywhere else. The only error is that the datum line is placed incorrectly for Section F.

 

[FordBronc]

Maybe?

 

[LSUpete]

Of all the people that have built support stands NOBODY has the actual dimensions?

 

[Steve83]

Steve, if it is such a minor calculation of pixels, why don't you just provide the dimensions?

Because I don't own an eB, or plan to, and I already spent probably 5 hours on that diagram (if not 10). I'm not ALSO going to calculate each measurement for everyone for the rest of my life. If it's not worth the effort for you to do 5 minutes' work, it's certainly not important enough TO ME to do it for you.

 

[LSUpete]

Because I don't own an eB, or plan to, and I already spent probably 5 hours on that diagram (if not 10). I'm not ALSO going to calculate each measurement for everyone for the rest of my life. If it's not worth the effort for you to do 5 minutes' work, it's certainly not important enough TO ME to do it for you.

Thanks for the diagrams