• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bolts for intake manifold

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
Aretha bolts standard for most manifolds? I have weiand. Can I get these at any auto parts store? Manifold is aluminum color so wanted to get new bolts to match.

Also what about bolts for my world valve covers any suggestions for those also

Thanks
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Bolts same for 302 intakes take old ones to hardware store and match em up, I like studs on valve covers
 

bad 68

Sr. Member
Joined
Jul 1, 2010
Messages
930
Loc.
Northest Washington
Summet Racing can get you bolt sets for any part of your engine. In stainless or black anodized and they are really quite afordable. When I order from them I usually get the part in 3 days including the day I place the order and thats with standard ground shipping.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
I bought stainless bolts at Home Depot, and didn't have to pay shipping
 

COBlu77

Sr. Member
Joined
Feb 10, 2004
Messages
867
Loc.
Arvada, CO
A few years back I used all stainless bolts for my intake and valve covers. I was pretty proud of myself for getting them from the hardware store a lot cheaper than the vendors were selling SS bolt kits for at the time. Since that time I have noticed that I have issues with leaks in the winter months, that go away in the warmer months. An engineer friend of mine and a fellow CB member, pointed out that stainless is more prone to heat/cold expansion and contraction than regular steel. I have since purchased standard steel ARP bolts for my intake and valve covers.
 

MR-CYN

Full Member
Joined
Nov 28, 2012
Messages
274
Loc.
NH
I get leaks in the winter that go away in the summer as well but I don't have any stainless bolts. Yet. :p
 

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
The vendors get there bolts from a hardware store and mark them up, then you pay shipping on top of that... Why not drive over to Ace or true value? For 10 minutes and $5 you could be done.
 
Top