City:
Stephenville Texas 76401
Price: $ 250000
Price: $ 250000
Bronco used part left over from my RUNNIN / Hunting Buddy upgrading his Bronco . He's cleaning out his storage shed at his business . I think he's getting ready to close his small machine shop & Mfg shop .. & retire .!.
2 NP 435 4 SPEED GRANNY Trans .. One just came out of his 1965 Ford P/U IT WAS RUNNING & DRIVING . hE PULLED IT & REPLACED IT with a C6.
OTHER I think is left over when we put NP 435's in our Bronco 20 years ago .. I bought 3 of them so we'd have some spare parte if needed .
& 2 Bronco Rat & RAN trans from 3 speed trans ..They should be good but 20 years ago I can't remember anything being wrong with either .
2 short tail housing from the back of those trans ..
And one 99% complete auto trans steering column that will fit the 65 F100 pu . He had 3 to make one for his PU but the mechanic didn't get into this one as he get the other 2 put together & got him fixed . for the C6 SWAP.
THERE ARE 2 OR 3 FUEL Tanks as he did a 23 gallon on his 66 one tank is from 72 ..those have been stored inside for 10 years .
... ASK & i'LL ASK HIM A PRICE if your interest Or make offer & I;ll pass it along ..
... I may have a couple of transfer cases but not sure if they went with that last Bronco of mine.
& that Np435 for his 65 P/U still has the 352 bell housing with it.
& There is a very rough 1965 long P/U bed but it had un-cut rear quarters with it . & a tail gate for some parts .
...
if price seems a little High it's because it wouldn't let me put what I was trying to list .. or best offer.
2 NP 435 4 SPEED GRANNY Trans .. One just came out of his 1965 Ford P/U IT WAS RUNNING & DRIVING . hE PULLED IT & REPLACED IT with a C6.
OTHER I think is left over when we put NP 435's in our Bronco 20 years ago .. I bought 3 of them so we'd have some spare parte if needed .
& 2 Bronco Rat & RAN trans from 3 speed trans ..They should be good but 20 years ago I can't remember anything being wrong with either .
2 short tail housing from the back of those trans ..
And one 99% complete auto trans steering column that will fit the 65 F100 pu . He had 3 to make one for his PU but the mechanic didn't get into this one as he get the other 2 put together & got him fixed . for the C6 SWAP.
THERE ARE 2 OR 3 FUEL Tanks as he did a 23 gallon on his 66 one tank is from 72 ..those have been stored inside for 10 years .
... ASK & i'LL ASK HIM A PRICE if your interest Or make offer & I;ll pass it along ..
... I may have a couple of transfer cases but not sure if they went with that last Bronco of mine.
& that Np435 for his 65 P/U still has the 352 bell housing with it.
& There is a very rough 1965 long P/U bed but it had un-cut rear quarters with it . & a tail gate for some parts .
...
if price seems a little High it's because it wouldn't let me put what I was trying to list .. or best offer.
