Bronco Script Valve Cover PCV & Grommet Replacement

[mr.ee's]

Anyone replaced the PCV Valve that comes with the Bronco Script Valve Covers?

I'm having a hell of a time matching it.
i've called Toms's (where i got the covers), Wildhorses (who also sells them) who haven't been able to help. i've called and emailed Scott Drake(manufacturer) and not heard back. so i thought i'd try here.

when i pull the pcv it has PCV1008 stamped on the side with a D printed on the bottom. when i search, i get a match at Autozone but that part is a different size.
when i search by vehicle year, model i get different sizes also without integrated elbows. when i go to chain parts store i just get "what's a pcv?"

anyone have a part number?

my grommet also needs to be replaced (cracked).
anyone had to replace theirs yet? i haven't started trying to source this. i'm hoping it's not a custom size.

 

[Old School]

Did you try Rockauto's "search by part number" ?

 

[69for5]

Not sure about the grommet, but the pcv valve worked fine for me when I trimmed it down to fit with a hacksaw. It was bottoming out in the valve cover before.

 

[fungus]

I believe this is the one I used on my '69 302. Fit was great and it looks/ functions good.

http://www.summitracing.com/parts/SUM-440308/

 

[mr.ee's]

"Not sure about the grommet, but the pcv valve worked fine for me when I trimmed it down to fit with a hacksaw. It was bottoming out in the valve cover before. "

yours was bottoming out on the baffle. interesting, i'll have to check that.

 

[69for5]

"Not sure about the grommet, but the pcv valve worked fine for me when I trimmed it down to fit with a hacksaw. It was bottoming out in the valve cover before. "

yours was bottoming out on the baffle. interesting, i'll have to check that.

Sure was, I thought it was kinda weird too, but I figured WTH, Im going to save myself the 40 mile drive to the auto parts store and try cutting it down a bit. So far so good.........maybe the guy just gave me the wrong valve to begin with??

 

[red hot71]

I bought my thur summit and they were ford motorsport. My valve covers are the 85 5.0 carburator cast alum. with twist in oil cap the rubber has to be larger in dia. to cover the twist in holes. The part# is M-6892-F,came with a couple sizes.