• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco Track Width

Scrambler82

New Member
Joined
May 5, 2013
Messages
1
Hello,
I need the Track width of the Early Bronco.
Both the front and rear axles.

Thanks for your time.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
57.5" iirc front and back axles, center of tread to center of tread. Add your extra tire width accordingly.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Anywhere between 57 and 58in. Its not uncommon for the front to be slightly wider than the rear. Ford was no wheres near as bad as GM was on different front to rear track widths.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The same track width front and rear were big advertising claims at the time they were sold. I didn't know why it meant anything till I drove mine in deep snow. My buddy with a Blazer had to have me pull him out of snow the '74 Bronco went through easily. We both had the same L78 by 15 snow tires.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I clamped straight edges on to my WMS and measure off of that. 58" rear... 77 housing
 
Top