ID Buit Dana 44 value?

[LOW KEY]

I have a built Dana 44 that was in a 75 Bronco. I would like to sell it but have no idea of the value. What I have here is a BUILT Early Bronco Dana 44 Front diff. It has less than 500 miles on it. It has been gone threw literally from one end to the other. Not a bolt left unturned. It was only replaced because of going with a full width Dana 60 instead.
It has had the following upgrades and modifications.
-Detroit locker
-Yukon 4.88 gears
-Chromoly axle shafts
-Spicer u-joints
-Warn premium hubs
-Spicer ball joints
-Duff skid plate
- Ford disc brake convertion using genuine Ford parts. (Not Chevy)
-Heim joint high steer
This is a price list of some of the parts.
http://www.4wheelparts.com/Drivetra...spx?t_c=12&t_s=237&t_pt=5589&t_pn=EAT187SL16C $610
http://www.wildhorses4x4.com/product/4340ChroMo_axles_Spicer760 $359.99
http://www.summitracing.com/parts/yga-24294/overview/ $257.22
http://www.wildhorses4x4.com/product/Warn_Premium_Locking_Hubs_Dana44_30-Spline $189.99
http://www.dufftuff.com/Dana_44_Skid_Plate_9_Skid_Plate_p/5762-5763-combo.htm $159
http://www.summitracing.com/parts/rmg-8310331/overview/ $114.97
The parts I have listed here alone add up to just under $1800.00. That doesn't include the purchase price of the Dana 44 or any of the hundreds spent on additional parts like brakes, rotors, Ball joints. High steer with heim joints, Or all new seals ect..............Or freight to get the parts. Well over $2000.00 invested in this axle. I know that it sound’s like a lot but do the math your self. Tons of money was sent on this axle. Any thoughts on Value or interests in purchase?

 

[1sicbronconut]

Hate to say it but if you get $1,000 out of it you'll be doing good.

 

[naneumranch]

Check PM