• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bye Bye diamondplate

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
Well, what started as a simple job lowering the bronco and putting new shocks on has turned into a project. I fitted new seats then decided to rewire and then gutted the interior. When I had it all apart I started looking at the diamondplate pieces on it and since I never liked them decided to remove the aluminum and grind the steel plate and smooth them out. It turned out pretty good and will require a lot of sanding and finishing but they will be smooth when done. What a job! Then I decide to get rid of he old school tube sliders and get some new rock rails today from a friend that gave me a great deal. Now I think I may re-do the bed liner and paint back to the original color while I have it apart. Nobody has ever had this problem I am sure!
 

Attachments

  • 20210620_094705.jpg
    20210620_094705.jpg
    127.8 KB · Views: 257
  • d plate olf.jpg
    d plate olf.jpg
    117.2 KB · Views: 232
  • d plate scraped.jpg
    d plate scraped.jpg
    99.7 KB · Views: 247
  • new sliders.jpg
    new sliders.jpg
    104.5 KB · Views: 204
  • old alum d plate.jpg
    old alum d plate.jpg
    80.5 KB · Views: 209

ared77

Contributor
Bronco Guru
Joined
Apr 21, 2013
Messages
3,178
Soooo many have said "I'll just take _______________ apart to clean it up a bit, then sometimes months or years later are still going. I know from experience!%);D
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Thank you for your public service of removing the diamond plate.

Todd Z.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
Unless I got a mullet I couldn't keep driving it and I don't think my wife would be happy about that! ��
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
Okay, I'm sure you did , but I dont see a mention of it, but I'll remind everyone just in case. Always wear protective gear when handling diamondplate. I always wear a breather and gloves and try not to come in any kind of contact with the stuff.
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
Yes, it gets into under your skin and there is no cure but amputation.....
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
Soooo many have said "I'll just take _______________ apart to clean it up a bit, then sometimes months or years later are still going. I know from experience!%);D

first time hearing that lol
 
OP
OP
ngsd

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
first time hearing that lol

Isn't that the truth! Fortunately I have learned the hard way and this will be back together in the next few weeks so I can enjoy the fall rock crawling weather. I just wanted to get the reliability issues dealt with and a little cosmetics along the way.
 

McLeod

Full Member
Joined
Jun 29, 2008
Messages
296
And in a few years the black "murdered out" fad will be frowned upon.

Diamond plate can get gaudy in excess, but to each their own.
 
Top