• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C-4 shifting problems w/FI 302

RT

Bronco Guru
Joined
Sep 29, 2003
Messages
1,037
Has anyone here had shifting problems with their C-4 after swapping to a 5.0 FI motor?

It doesn't aways want to downshift on it's own when I come to a stop , and when it's cold in the morning I have to get up to 50mph before it will shift to 3'rd, after it's warm it seems to shift fine ,,,mostly.

When I took it to a tranny guy I trust , he suggested the vacume signal from FI motors can cause problems with the C-4's & c-6's.
It may take some time , but he says it happens a lot .

I did my swap close to 3 years back , tranny problems started a couple weeks ago .

Anyone had luck messin' with the modulator or valve body to fix this ??

I'm going to bring it into him next week , he wants to try looking at the valve body and modulator before we commit to pulling it out .

Thanks Guys

Bob
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
The modulator controls part throttle upshifts but if it's shifting from 1st to 2nd gear normally you can probably rule it out. The vac from an engine really has nothing to do with wether it has EFI or a carb. Sounds a lot like a sticky valve body to me. Look in the tech section. BwoncoHowie just wrote a good tech article on valve body cleaning.
 
Top