• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
    • Viperwolf1
      Viperwolf1 replied to the thread 4R70W Advanced Adapter help.
      I like to put a small bead in that inside corner where the retainer flange is. The oring is supposed to seal that up, but I don't trust it.
    • Viperwolf1
      Viperwolf1 replied to the thread 4R70W Advanced Adapter help.
      That's because it goes between the tcase and the bearing retainer. Put the gasket over the hole then put the bearing retainer in the tcase.
    • Viperwolf1
      Viperwolf1 replied to the thread 4R70W Advanced Adapter help.
      You gotta reshape the top of the bushing to fit the new adapter.
    • Viperwolf1
      Viperwolf1 replied to the thread Cam recommendation needed.
      E7TE are late truck/5.0 HO heads. Not terrible but explorer heads would be a better choice.
    • Viperwolf1
      Viperwolf1 replied to the thread Grill Data?.
      After inspecting a half dozen grills of various years, eyebrow to 1970+, all have the same stamping.
    • Viperwolf1
      Viperwolf1 replied to the thread C4 Race pan?.
      I can tell that is a 1972 or 1973 C4 from the direct clutch plug on the side and it has a small intermediate servo.
    • Viperwolf1
      Viperwolf1 replied to the thread Firing Order 351w Confusion.
      1-8-4-5-6-2-7 Must be an economy cam. Probably hard to find the 7 wire distributor caps though.
    • Viperwolf1
      Viperwolf1 replied to the thread Dana 20?.
      The T and J shafts are quite different. It may look like a snap ring groove on the J shaft but it isn't. J is on the left.
      • Bronco 018.jpg
      • IMG_20130830_144430.jpg
    • Viperwolf1
      Viperwolf1 replied to the thread 66 moral dilemma.
      They do skip I because it looks like a 1.
    • Viperwolf1
      Viperwolf1 replied to the thread 66 moral dilemma.
      Any idea of the mileage when it was first sold? Maybe the dealer used it as a demo and something happened to the engine a month after...
    • Viperwolf1
      Viperwolf1 replied to the thread C4 Front Planetary.
      There are 2 or 3 versions of that front planet assembly, so you may need to find one in the right year range for your C4. General...
    • Viperwolf1
      Viperwolf1 replied to the thread C4 Front Planetary.
      From other C4s. There are no new ones sitting in a warehouse anywhere. It is possible to use planet gears from a rear planetary assembly...
    • Viperwolf1
      Viperwolf1 replied to the thread C4 Front Planetary.
      A stock 3 pinion planet is plenty strong for your use. We use a stock planet in the 500 horse Baja racer. It's driven hard but only 100%...
    • Viperwolf1
      Worn out J shifters can be really sloppy. You can remove it and shift the tcase with a pry bar to help diagnose the problem.
    • Viperwolf1
      It's not a transfer case problem if reverse works. There are no clutches or sprags in a D20. It's all gear drive. You could have a weak...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top