C bushing question

[Bo Boulware]

I have read the many post on this but thought I'd just ask. My 69 Bronco measures 7 1/2" from axle to frame in the front and 7" in the back. Can anyone recommend the C bushing I should use and best place to purchase them?

 

[SLOWnEASY]

For starters I'm going to say you need 4 degree bushings. But read on.... Your numbers look a tiny bit high (like 1/2 inch) in the front but that could be nothing more than it's a real pain to get an accurate measurement under there. Or you have newer springs. You really need to get a computerized alignment check so we know where you are. But based on your numbers I'm assuming you have an unlifted Bronco. I just went through this same journey on mine. https://classicbroncos.com/forums/t...adjusting-caster-to-address-wandering.329174/ Pay attention to post #2 from JamesRoney where he talks about what to measure. When all was said and done I wound up with 4 degree bushing and my Bronco drives really nice down the road now.
Edit to ask if you have manual or power steering.