• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C4 Automatic Transmission Shift Rod Question

TX-ZACH

Full Member
Joined
Sep 27, 2021
Messages
287
Loc.
Chappell Hill Texas
Finding gremlins going back together from painter. Putting the roll cage back in and moving the Bronco the column shifter went free and unable to move from Rev to Drive, 2nd through 1st. I thought the collar might be busted but upon further inspection the shaft from the C4 that terminates to the column selector plate was disconnected. It appear to be a specialized bolt, can anyone tell me what kind of nut or snap ring type fastener I need? I have it tie strapped for now to get it back in the garage.
 

Attachments

  • linkage shaft.JPG
    linkage shaft.JPG
    95 KB · Views: 166

LUBr LuvR

Contributor
Bronco Guru
Joined
Dec 31, 2015
Messages
2,228
^^^ This. Those bushings get old, brittle and disintegrate. Had mine exit while driving down the road one day. Zip ties worked long enough to get back home. They can be a bugger to press in, but will fix you up, good as new.
 

Master Chief

Contributor
Bronco Guru
Joined
Nov 24, 2006
Messages
1,312
What the others have said and billh posted a link to. It is simply a plastic bushing. Pop the shift rod out of the old one, replace the bushing with a new one, then press the rod back through it. Believe that I used a small pry bar or large flat blade screwdriver for removal and a pair of channel lock pliers to seat the rod.
 
Top