Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Some of them have a hex on them for a socket and they do un-screw. I have seen them without a hex on them and I'm sure they still un-screw but I have never had to remove one of them without the hex.
I had one without a nut built in to it. I heated mine up with a torch, then I locked a pair of vice grips on the threads and then I backed it right out of the engine block.