• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Can you replace the oil filter threaded stud?

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
Can the threaded oil filter stud be replaced? I think the threads are boogered up on mine. Any ideas or direction on how to get it off?

Thanks Much,

Blue71
 

2badrotties

Just a Bronco guy !
Joined
Sep 10, 2002
Messages
6,854
Loc.
Niskayuna N.Y.
Some of them have a hex on them for a socket and they do un-screw. I have seen them without a hex on them and I'm sure they still un-screw but I have never had to remove one of them without the hex.
 

rustbucket

Bronco Guru
Joined
Mar 22, 2004
Messages
1,579
Find two nuts that fit, and use one as a jam nut and turn it out with the bottom nut.
 

2badrotties

Just a Bronco guy !
Joined
Sep 10, 2002
Messages
6,854
Loc.
Niskayuna N.Y.
Since the threads are boogered up , you could grab it with a pipe wrench. If you are lucky, it is the one with the 1 1/4 hex on it.
 

BwoncoHowie

C-4 Wizard
Joined
Nov 11, 2002
Messages
3,571
I have had success with an internal pipe wrench.
 

Attachments

  • internalpipewrench.jpg
    internalpipewrench.jpg
    29.8 KB · Views: 135

bronco-uno

Full Member
Joined
Dec 18, 2002
Messages
154
Loc.
wisconsin
I had one without a nut built in to it. I heated mine up with a torch, then I locked a pair of vice grips on the threads and then I backed it right out of the engine block.
 
OP
OP
Blue71

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
Thanks guys for all the suggestions. If I can get to it...I will try and turn it.

Thanks Much,

Blue71
 
Top