• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Carb spacer

badkarma510

Jr. Member
Joined
Mar 10, 2013
Messages
61
Loc.
Fort Smith, Ar
Been dealing with carb issues so I decided to get a hold or a 2150 that was rebuilt and threw it on my 77. I am still having issues with leaks from the carb spacer, not sure I have the right one. Talked to Jegs and they sent my ones that didn't work..... twice. What one do I need..... 302, auto, 2150 carb, PB? Thanks.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
I'd take it off and look at it. Sounds like you have the wrong gaskets
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The original '77 intake was the EGR type. This means there's a hole in the carb mounting surface allowing exhaust from the cross over passage to a spacer with an EGR valve. Is this the intake you have?
 
OP
OP
B

badkarma510

Jr. Member
Joined
Mar 10, 2013
Messages
61
Loc.
Fort Smith, Ar
it is.... spacer that came with it is, I believe an earlier spacer that leaves a small gap by the EGR port on the manifold, thus giving me a leak. local shop here tried welding a plate to the side.... worked for a little bit but led to a leak.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
You can either block off the EGR, if local emission laws allow it, or replace it with an EGR spacer that has an EGR valve on it. A quick look on ebey showed both spacers that simply cover the EGR hole and some that allow the mounting of an EGR valve. Just search Ford carburetor spacers. All of these are Ford OE NOS parts for various '70s vehicles. None of the after market spacers will work.
 
Top