Centech fuse panel mounting

[fromme]

My 71 has no glove box insert and the fuse panel on the Centech harness the PO installed is just flopping around behind the dash panel. I bought a new plastic glove box insert but I'm unsure as to how to mount that fuse panel to it. I've never seen a factory set up either so I'm at a loss. Can anyone shed some light on this and tell me if I need to modify anything there and how it attaches please?

 

[Viperwolf1]

If you look at the Painless manual on page 22 it shows how their fusebox is mounted to the glovebox. Very similar to original mounting except the fusebox is different.

http://www.painlessperformance.com/Manuals/10113.pdf

 

[fromme]

Thank you once again. I've been working real hard my rig, and I've just about got it right. I've had to undo so much wiring stuff and some mechanical stuff. I had a good base to work with, there were just some unfinished jobs and hack jobs.

 

[ransil]

ceetech harness manual cane be found here.
http://www.earlybroncos.com/
should be a template to cut & drill the glove box.

 

[fromme]

Perfect, exactly what I need. Thanks.