• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Centech Wiper Switch Wiring Help

c2computer

Sr. Member
Joined
Jun 25, 2001
Messages
772
Loc.
Castle Rock, CO
Does anyone have a good idea of where each wire goes on the Centech wiper switch. I have their switch with their wiring in my dash but the wires have come off recently and it is starting to rain here now. Any help is much appreciated.

:p
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,101
Loc.
NorCal flatlands
Ouch. Yet another reason I don't like the Centech wiper switch setup. You can get the function of each wire color off the article I wrote but it won't help you re-connect the switch you have. My advice would be to call Centech. I talked to them a couple of times when I was installing my harness. They were very helpful.
 

Trigger

Sr. Member
Joined
May 20, 2002
Messages
620
If the sheet they gave you doesn't work I can take a picture of mine. It is hanging below the dash as I'm doing my Centech install right now.
Trigger
 
Top