Champion radiator

[deltabronco]

Anyone use a Champion 3 core aluminum radiator and fan shroud? It took awhile to get it to fit in the mounts I had (bit of grinding on mounts fixed that). But now I can figure out how the shroud attatches. Actually don't think the hole is big enough for the fan. Anyone else have issues?

 

[rguest3]

I have had three of the Champion Radiators. Use 4-core mounts and it drops right in. I used the original Bronco shroud as well. Just minor trimming of shroud for serpentine system.

 

[deltabronco]

That may explain it. I'm using a 3 core mount. ( made sense to use 3 core on 3 core) I may seek how it runs without the shroud.

 

[stlo]

I use the stock shroud with 4 core mounts on the bottom and 3 core on the top with no issues

 

[Justafordguy]

4 core mounts and stock shroud here too. You will need a shroud for sure.

 

[mjramacher]

I used a Ron Davis shroud with the 4 core mounts no problems other than some minor trimming at the upper mounts.

 

[deltabronco]

Yeah the shroud champion sent is pretty much worthless.I may have to look into another option.I took the rubber out of the mounts and opened up themy up with a bench grinder. Fits good now. Thanks for the info guys.

 

[deltabronco]

This is becoming a pain. Think I may go electric. Any recomendations?

 

[Timmy390]

I installed an American Eagle Aluminum Radiator 2-Row Core 1" Thick tubes and went with this fan: http://www.wildhorses4x4.com/produc...rpanel&utm_medium=email&utm_campaign=category

I got the stock shroud to fit once I clearanced for the mounting brackets and opened the fan hold just a tad.

Tim

 

[76Bronco302]

Ron Davis shroud here

 

[Sabas]

I did the Volvo fan with a custom shroud.

Sabas