• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

changed intake,new probolem,

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
:mad: I changed the intake on my 302 from stock to an edelbrock performer, now it blows the water out of the overflow tube only when its under a load, it doesnt do it sitting still, just driving it. hell, i guess I got a bad head gasket. I put on a new radiator cap, changed the thermostat, took the thermostat out, had the radiator boiled. got any sugestion anyone?
 

brewdude

Bronco Guru
Joined
Jun 12, 2002
Messages
1,571
Loc.
Groveland, CA
I had the same problem when I changed my manifold. It probably has air pockets you will need to run your engine with the radiator cap off for a while and continue filling it up with fluid. It took me about 15 min to get most of it out, then check every few days or so to see if the fluid level is going down.
 
Top