• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Changed intake now won’t start

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
As sure as I can be. I even used one of those TDC indicators that the piston pushes up.

The thing is, there's 2 TDC's. Compression stroke, and exhaust stroke. Maybe you accidently set it up on the exhaust stroke and now it's timed "180 out". Here's how I find TDC on the compression stroke:
Remove plug #1, put my thumb over the hole, and using a remote starter start bumping the engine until I feel pressure against my thumb. At that point it's close, so I take a big ratchet and rotate the motor manually to 0° TDC.
 
OP
OP
B

Brewbro21

Sr. Member
Joined
Jul 4, 2004
Messages
919
The thing is, there's 2 TDC's. Compression stroke, and exhaust stroke. Maybe you accidently set it up on the exhaust stroke and now it's timed "180 out". Here's how I find TDC on the compression stroke:
Remove plug #1, put my thumb over the hole, and using a remote starter start bumping the engine until I feel pressure against my thumb. At that point it's close, so I take a big ratchet and rotate the motor manually to 0° TDC.

Ive done that, and after using that TDC indicator, I’m positive my timing marks are accurate as well. I was hoping I was 180 out…that’s an easy fix.
 
Top