Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I saw in an older issue of Bronco Driver that Duffs (IIRC) was making new coil buckets. I can't find them anywhere but am looking for a new set that can see a lot of abuse. Anyone???
Has anybody ever set new buckets higher and run taller springs for increased travel with less effective lift? It seems to me that you could pull this off to keep steering linkage more managable and ingress/egress comfortable. It would do wonders with the new longer arms that are available and the progressive bump stops that were unheard of just a few years ago.
Coil buckets attach with two in line 3/8 or 7/16 bolts (can't remember). I would not use any kind of lift block and longer bolt to attach the coil buckets. Way too much bending goes on there, IMHO.
thanks for the link. exactly what i was looking for.
Has anybody ever set new buckets higher and run taller springs for increased travel with less effective lift? It seems to me that you could pull this off to keep steering linkage more managable and ingress/egress comfortable. It would do wonders with the new longer arms that are available and the progressive bump stops that were unheard of just a few years ago.