Core support measurements

[NYLES]

Anybody have a "blueprint" of the outside edges of a core support? a good drawing will do

 

[JAFO]

Not sure these are what you want, but here are the measurements I took when rebuilding mine...

Here is a slideshow of all measurements I have archived online...
http://s1363.photobucket.com/user/gary__seven/slideshow/Bronco Measurements

 

[NYLES]

Not exactly but it will help!

Thanks

 

[JAFO]

What is it you are doing? I mean, what do you need to see. I have pics of the core support bare on the body, such as below. But none I can find of the core support before I installed it.

 

[NYLES]

Full width outer to outer, and height top to bottom? Im pulling my fiberglass inner stuff out doing a tube inner, but I just rolled mine busted up some glass and not sure it was right to begin with.

nice tub you got there itll look good!

 

[JAFO]

Found this ad at Bronco Hut with the measurements. But really small picture.
I enlarged it a little on my PC. Looks like 57.25" across.
20.75" from top of the tabs to bottom of radiator supports.

http://broncohut.com/collections/body-panels/products/radiator-core-support-1?variant=3035854593

Thanks about the tub. Actually, those are old pics now. The Bronco is on the road. It is the one in my garage here.

 

[jmhend]

Found this ad at Bronco Hut with the measurements. But really small picture.
I enlarged it a little on my PC. Looks like 57.25" across.
20.75" from top of the tabs to bottom of radiator supports.

http://broncohut.com/collections/body-panels/products/radiator-core-support-1?variant=3035854593

Thanks about the tub. Actually, those are old pics now. The Bronco is on the road. It is the one in my garage here.

Maybe this is to old but none of the links work