Could I get a picture of a perfectly aligned drag link and track bar

[SP66]

About to move my drag link on top of my drop pitman want to see the best examples of lifted setups...I have 4.5 inch springs and 1.5 body lift. Want to get the steering as good as I can for highway driving.

 

[Madgyver]

look in my gallery.
<====<<
not perfect but close to parrallel

 

[Lebe]

Hope this helps. 3" BL and 5" susp.

 

[garberz]

You've got to look close to see both. My track bar is mounted outside of the coil spring on the housing yoke. It travels about the same radius, as if it were mounted on a track bar riser. Sorry for the small pics.

 

[shamu]

You've got to look close to see both. My track bar is mounted outside of the coil spring on the housing yoke. It travels about the same radius, as if it were mounted on a track bar riser. Sorry for the small pics.

Mark are you running a double pan hard?

 

[broncobsession]

The other is a steering box brace.

 

[Bronco Junkie]

Here are some more. 2.5 inch suspension lift....stock/original body mounts.

 

[garberz]

The other is a steering box brace.

Winner, winner. Chicken dinner.

That's what it is.

 

[shamu]

Winner, winner. Chicken dinner.

That's what it is.

Why did I start the chicken dinner thing%)

 

[garberz]

Sorry, I just thought it was fitting.