Coyote 5.0 Transmission Adapter

[dereksavy]

This adapter kit is made so you can put a Coyote engine in your Bronco and be able to use your small block transmission. Yes you read that right, you can now bolt up a small block C-4 C-6 AOD or 4R70W transmission to a Coyote 5.0L engine. This can save you thousands of dollars on a Coyote conversion. Now putting a Coyote in your Bronco is close to the same price as a good rebuilt small block with EFI. Part #16-00521
http://www.bcbroncos.com/store/product_info.php?products_id=2393

 

[KyleQ]

Very cool - you guys should reach out to the hotrod crowd!

 

[TwoDalesDad]

You guys at BC Broncos...really are on top of their game....

 

[sureshot40sw]

why is this not found? is it still available?

 

[chuck]

why is this not found? is it still available?

Yes it is, look here http://www.bcbroncos.com/store/product_info.php?products_id=2501

 

[GRW]

ok so I feel real dumb asking this but whats a Coyote 5.0?
Is it a manufacturer that builds 5.0?

Thanks

 

[dao1980]

It's a little wild doggy that hunts in packs and "yips" at the full moon.

 

[badmuttstang]

Yeap Wile E. and Acme got together and built a new motor goes like stink but only for two seconds. Seriously its Fords new 5.0 modular motor like the 4.6 or 5.4 but so far seems to be a better built motor.

 

[sureshot40sw]

Yes it is, look here http://www.bcbroncos.com/store/product_info.php?products_id=2501

Awesome. Will this work with an 89 AOD ? Is there a writeup somewhere?

 

[Cactus killer]

This is not available anymore but we do offer a c4 bell housing that is a direct swap just change it out and bolt it on.

 

[darmapc]

Doggone-it - I sure could use one of these adapters. Is there any way one could be special ordered? I built an awesome 4R70W using a 2004 V6 (also SBF) trans housing to mate to my '92 5.0 motor. I also adapted a Gear Vendor OD behind it. It was a lot of work and it all works beautifully. I have since decided to do a Coyote motor swap, which of course requires the Mod Motor style bolt pattern. This is in a 1972 Mustang. I would happily pay extra to have one of these adapters made LOL. Or if anyone knows of another adapter solution please keep me in mind!

 

[Not4shof150]

I have a 2014 F150 5.0L bolted to a C6 are people still interested in a kit?

 

[Not4shof150]

I have a C6 bolted to a 2014 5.0L and am looking for interest in selling a kit. It would include bolts, machined adapters and a flex plate. The starter would be the buyers responsibility. It does require you to cut, grind and drill the block and bell housing, fairly simple modifications.

 

[Marcelito]

Where i can get a c6 adaptar to a coyote 5.0

 

[Not4shof150]

I'm working right now with a machine shop to get the pricing for the bushings. When we're you thinking about ordering one?