• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Coyote swap coolant question

tommybursi

New Member
Joined
Apr 6, 2015
Messages
2
Hey guys. Long time watcher, first time poster here. I’m progressing through a coyote swap (gen2) into my 68 bronco. I’ve hit many roadblocks, but it’s coming along. Question for guys that have completed it. How do you run the smaller coolant hoses on front of motor? I have your and lower radiator hoses installed. I am not doing heat/ac now (definitely later). I have three spots coolant hoses go in/out of motor. Not sure how I should route, run, cap, connect these lines. Any help is appreciated.

Thanks
 

Wild horse 75

Sr. Member
Joined
May 9, 2023
Messages
464
Loc.
BC
I’m not sure which hoses they are but you need to have circulation on the heater hoses all the time or you’ll overheat the heads. That’s why there’s an H block in them. You won’t want to just loop them since the flow will be too much.
 
Top