• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Crazy Tach Readings

taylorB

Full Member
Joined
Apr 8, 2011
Messages
215
Loc.
Canton, GA
Alright folks, its a cheap sunpro tach which is new. it will randomly stop reading then pick back up again. lets say im crusing at 3,500 the needle will drop to 2 grand or even hit 0 then bounce back up to 3,500. sometimes the needle wont make it to the correct rpm untill drops back down. Its running off of points ignition.
 
OP
OP
taylorB

taylorB

Full Member
Joined
Apr 8, 2011
Messages
215
Loc.
Canton, GA
If the back light doesnt flicker can i assume the 12v wire is good? what about a weak signal due to worn condenser or somethin?
 
OP
OP
taylorB

taylorB

Full Member
Joined
Apr 8, 2011
Messages
215
Loc.
Canton, GA
Thanks for the links izzy, the tach shows the correct rpm, just drops below it like there is a weak signal form the (-) side of coil.

The ground wire is run to the ebrake bolts on the dash, ill see what moving it to the (-) side of battery does.
 
OP
OP
taylorB

taylorB

Full Member
Joined
Apr 8, 2011
Messages
215
Loc.
Canton, GA
Moving the ground did nothing. But if i grounded the wire for the back light and just left the reg ground unhooked the tack worked great....but now i dont have a back light.
 
Top