• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Currie Dana 44 and big bearing 9”

LEDCREATIONS

Full Member
Joined
Jul 18, 2009
Messages
324
Loc.
Mesa, Arizona
I have a nos
currie built big bearing 31 spline 9” with 4:10 gears, locker, disc brakes with calipers and parking brake cables

Also a Currie built D44 same gears, lockers, disc brakes.

These haven’t been used.

I’m curious what what I can get for each. I might be going a different route with my build and wouldn’t need them.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
5,662
I have a nos
currie built big bearing 31 spline 9” with 4:10 gears, locker, disc brakes with calipers and parking brake cables

Also a Currie built D44 same gears, lockers, disc brakes.

These haven’t been used.

I’m curious what what I can get for each. I might be going a different route with my build and wouldn’t need them.
Less than what you paid for them, or at least that is my experience. Usually above 75 to 80 percent. Also selling them local, because shipping right now is through the roof.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
10,374
Any photos of the assemblies you can post?

Thanks,
Todd Z.
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
35,284
Depending on how long ago you bought them, you might make money. Still won't get what they are worth new today. Even though they are "new", there is no warranty and are more like used but no miles on them.
 
Top