• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Custom air intake

AZ4x4

Jr. Member
Joined
Mar 23, 2015
Messages
137
Loc.
Colorado Springs
I have a 1968 Bronco with a Motorcraft 2BBL. I am installing a scoop on the hood and I have cut out the two intake holes in the front. I was wanting to some how pipe the air in thru the holes and straight into the air cleaner. Does anyone have any photos or ideas on how I can do this? The intent is to segregate the air from the engine heat.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
You would be better off cutting holes in the rear of the scoop as in the front is a high pressure area vs the cowl. That's why the factory used cowl induction. Now if you're crawling then it won't make much difference. Again the factory used a flexible boot to seal that area but just the front holes may not flow enough. Great idea, just do some more research and let us in on your findings as it's a problem for most of us.
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
I cant remember where I saw it, maybe the FSB site, but a guy pulled the intake tubing and filter box off a 90s Explorer for his carbed EB. Bought some sort of collar adapter for the carb and routed the filter housing over to the drivers side compartment up front. Fit perfectly from the pics he posted. Ill keep looking

Heres a few

http://classicbroncos.com/forums/showthread.php?p=2135137
 

smokinjoe

Bronco Guru
Joined
Jul 8, 2007
Messages
1,139
Loc.
New Braunfels, TX
Found it on YouTube, look for Fintech Repair Shop's video "Early Bronco Cold Air Intake Box Conversion Jeep"

Maybe that's an option for you?
 

JAFO

Bronco Guru
Joined
Dec 3, 2007
Messages
1,556
Loc.
Beaverdam
I was driving and just FELT it. Another hood just got cut for a scoop. I felt a tremor in the force.
 

CraigS

Sr. Member
Joined
Jun 14, 2001
Messages
368
This is a good answer.
 

Attachments

  • airbox3.jpg
    airbox3.jpg
    40.6 KB · Views: 159
OP
OP
A

AZ4x4

Jr. Member
Joined
Mar 23, 2015
Messages
137
Loc.
Colorado Springs
You would be better off cutting holes in the rear of the scoop as in the front is a high pressure area vs the cowl. That's why the factory used cowl induction. Now if you're crawling then it won't make much difference. Again the factory used a flexible boot to seal that area but just the front holes may not flow enough. Great idea, just do some more research and let us in on your findings as it's a problem for most of us.

What do you mean a high pressure area?
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
What do you mean a high pressure area?

The air flow over the hood causes the front of the hood to be in low air pressure, and the rear where the air must turn to go up the windshield to be a high pressure zone.

Holes in the front of a hood scoop are good for letting heat out of the engine compartment, the air gets sucked out.

Holes in the rear near the windshield push air into the engine.
This is why cowl induction hood scoops work so well.
 
OP
OP
A

AZ4x4

Jr. Member
Joined
Mar 23, 2015
Messages
137
Loc.
Colorado Springs
The air flow over the hood causes the front of the hood to be in low air pressure, and the rear where the air must turn to go up the windshield to be a high pressure zone.

Holes in the front of a hood scoop are good for letting heat out of the engine compartment, the air gets sucked out.

Holes in the rear near the windshield push air into the engine.
This is why cowl induction hood scoops work so well.

I've seen holes cut out on the sides of the scoop of before , would that help with the high pressure issue.? Also do you have any pictures of a scoop that is correct for the air flow?
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I've seen holes cut out on the sides of the scoop of before , would that help with the high pressure issue.? Also do you have any pictures of a scoop that is correct for the air flow?

Holes on the sides of the scoop would also be in low air pressure.
 
Top